Thread Adapters - Walther



Walther P22 Thread Adapter

Give your Walther P22 pistol a real threaded barrel today!  Simply replace the factory barrel nut with our thread adapter. This adapter enables you to attach accessories to your Walther P22 pistol, such as flash hiders, compensators and fake suppressors. Does not include a thread protector.

INSTRUCTIONS: Rack the slide back on your Walther P22 so it's locked open. Now you should see that the barrel retainer nut can be unscrewed to expose M8x.75 threads. If you bought your Walther new it should have come with a handy little 10mm wrench to remove the barrel retainer nut. If you bought it used you may or may not have the wrench.  Our thread adapter screws right on in place of the factory retainer nut.  When tightening, be sure the little notch on the barrel shroud is pointed down, otherwise you will damage your gun.

Walther P22 Thread Adapter
Steel & Hot Salt Blued
10mm wrench flats
1/2-20 thread for accessories sold in Europe

 $60
P22 Adaptor 1/2-20

Add Protector 1/2-20


Walther P22 Thread Adapter
Steel & Hot Salt Blued
1/2-28 thread for accessories sold in USA
 $55
P22 Adaptor 1/2-28

Add Protector 1/2-28


Walther P22 Thread Adapter
Steel & Hot Salt Blued
M14x1.0 LH thread for AK accessories

 $55
 out
Walther P22 Thread Adapter
Stainless Steel
1/2-20 thread for accessories sold in Europe

 $50
Walther P22 Thread Adapter
Stainless Steel
1/2-28 thread for accessories sold in USA

 $50
Walther P22 Thread Adapter
Stainless Steel
M14x1.0 LH thread for attaching AK accessories
 $65
Walther P22 Thread Adapter
Aluminum
1/2-20 thread for accessories sold in Europe
 $25
Walther P22 Thread Adapter
Aluminum
1/2-28 thread for accessories sold in USA
 $25
Walther P22 Thread Adapter
Aluminum
M14x1.0 LH thread for AK accessories
 $25




stainless 1/2-20


stainless 1/2-28


stainless M14x1LH (left-hand thread)

blued 1/2-20




see what can happen...

Comments