Fake Accessory 22LR

This is a Do-It-Yourself project kit to make a fake suppressor or other accessory.  YOU decide what it can be.  It's your call.  YOU choice.
Or, use it as-is, for display purposes.  It looks real bad ass.  Can be shot safely, as-is.

This device will not silence, muffle, or diminish the report of a firearm. The tube unscrews from the core just like a real monolithic suppressor. Made from weapons-grade aluminum tube and solid bar.

  • Minimum: Drill press with a centerdrill bit, 1/4" drill bit, 1/2" drill bit; Fine grit sandpaper and a file for deburring.
  • Recommended: CNC milling machine with 5/16" diameter 2-flute 45-helix solid carbide end mill for cutting aluminum; Manual lathe for deburring and polishing the core after machining so the tube slides on easily; Adjustable hand reamer 1-3/16" to 1-11/32" for smoothing the inside of the tube if necessary.
  • Core length: 6"
  • Tube diameter outside: 1.38"
  • Weight overall: 13.2 oz.
  • Through hole: .25" bore diameter for safe passage of the 22LR
  • Thread size of mount: 1/2"-28 TPI
  • Thread size of tube and core: 1-1/4"-32 TPI
  • Core diameter outside: approximately .001" taper increase across the entire core length, up to 1.220" outside diameter at the very front where it is a very close tolerance fit with the end of the tube.  Lightly coated inside with white lithium grease.
  • Tube diameter inside: approximately 1.2205" inside diameter
  • Hex flats for screwing and unscrewing of the tube and core
  • Front of tube and core are faced flat together so it appears as one piece.
  • Make from 6061 aluminum bar and tube.  No anodized protection. Plain aluminum matte finish.
  • 100% FAKE!

Fake Accessory 22LR, 1/2-28 Aluminum, DIY kit


14 day money back guarantee- You may return the merchandise for any reason if you are not completely satisfied.  There is no re-stocking fee.  The cost of the item will be refunded in full minus the shipping fees.